TVLogic RKM-270A 2x7-inch LCD 3RU Multi-Channel Rack Mount Monitor - TVL-RKM-270A

A rack-mount monitor with 2 × 7" LCD screens, which has the same high performance display as LVM-074W. Wide viewing angle IPS LCD with 1024 x 600 resolution. It supports SDI in/out and HDMI input.

SPECIFICATIONS

Display Spec.

Size	7"
Resolution	1024 X 600 (16 : 9)
Pixel Pitch	0.15mm
Color Depth	16.7M
Viewing Angle	160°(H) / 160°(V)
Luminance	400cd/m2
Contrast Ratio	800:1
Display Area	154(H) x 90(V) mm

Input

1 X BNC	Analog Input (Composite)
2 X BNC	3G-SDI A/B Channel Input
1 X HDMI	HDMI Input

Output

1 X BNC

3G-SDI Output

Input Signal

Analog	CVBS
3G SDI	2.970Gbps
HD SDI	1.485Gbps
SD SDI	270Mbps
HDMI	1080P(24/25/30/50/60) / 1080i(50/60) / 720p(50/60) / 480i(60) / 480p(60) / 576i(50) / 576p(50)

SDI Input Signal Formats

SMPTE 425M-A/B	1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98/30sF /29.97sF/25sF/24sF/23.98sF)
SMPTE 296	720p (60/59.94/50)
SMPTE 274	1080i (60 / 59.94 / 50) 1080p (30/29.97/25/24/24sF/23.98/23.98sF)
SMPTE 260	1035i (60/59.94)
SMPTE 125	480i (59.94)
ITU-R BT.656	576i (50)

Audio

Audio In	Embedded Audio/Analog Stereo (Phone Jack)
Audio Out	Analog stereo (Phone Jack) / Internal Speaker (Mixed Mono)

FPGA Functions

1:1 Pixel Mapping Modes for SD/HD, 3G-SDI Level A/B, Audio Level Meter Display, Blue Only, Focus Assist, H/V Delay, Key Lock, Luma(Y') Zone Check, Marker, Mono, Range Error, Time Code Display, UMD, Various Scan Modes, Waveform/Vector, Zoom

Closed Caption

CC-608 ANC, CC-608 LINE 21, CC-708

Other Functions

USB	Firmware update by USB memory stick
Ethernet	Ethernet Control support

Dimensions

1:1 PIXEL MAPPING MODES FOR SD/HD

Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

3G-SDI LEVEL A/B

Supports 3G-SDI Level A/B input.

AUDIO LEVEL METER DISPLAY

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

BLUE ONLY / MONO

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

CLOSED CAPTION

Closed caption.

FOCUS ASSIST

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.

H/V DELAY

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.

KEY LOCK

Key Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.

LUMA(Y') ZONE CHECK

Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

MARKER

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.

RANGE ERROR

Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.

TIME CODE DISPLAY

Displays the Timecode information on the screen.

UMD

Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

USER ASPECT

Adjusts the Width /Height display ratio.

VARIOUS SCAN MODES

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

WAVEFORM/VECTOR SCOPE

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

ZOOM

Magnifies the input signal from 0% to 90%.