Fujinon TS-P58A OS-Tech Optical Image Stabilizer For 2/3-inch Lenses

*(If using a Canon lens we would need to know at the time of ordering as a modification from the factory is required to work with Canon lenses)

The Fujinon TS-P58A is an optical stabiliser for 2/3-inch lenses. When used, the stabilizer will provide glass-smooth images even at extreme telephoto. Often when lenses increase magnification, they become increasingly difficult to keep steady. The TS-P58A virtually eliminates this problem. The element inside the stabilizer compensates for these slight but noticeable vibrations, whether it is from wind or unsteady support platforms. The special "sandwich" design allows it to easily be fit between the camera and lens, making it very simple to take on and off.

Using the unique TS-P58A on telephoto ENG lenses, unwanted picture vibration caused by wind, movement of the support platform, etc. are now a thing of the past. Fujinon's OS-TECH for ENG lenses takes the operation range for telephoto lenses to the limit and beyond. The amount of compensation on tele-side with 2x extender is approximately 1/5 of image height and the adaptable frequency is 1-10Hz.

This is made possible by the unique technology in image stabilization from Fujinon, providing sharp and steady images even during challenging situations. Different to other electronic stabilization methods for ENG lenses, the Fujinon OS-TECH uses an optical- shift compensation system. A sensor detects the most subtle movements causing image vibration and a shift correction signal is generated to initiate the appropriate compensation. The phenomenon of over-compensation (e.g. immediately after stop- ping a pan or tilt movement) has been greatly reduced by employing an exclusive, Fujinon proprietary, algorithm.

The exclusive Fujinon OS-TECH adapters can be quickly mounted between a Fujinon lens and the camera. The TS-P58A can be used with most telephoto ENG lenses, in order to increase your flexibility and to decrease overall costs.

SPECIFICATIONS

Fujinon TS-P58A Specs

Mount	Bayonet, 2/3" B-Type
Power Requirements	12 VDC (With Battery From Camera)
Power Consumption	4.2W (From Camera)
Dimensions	2.3 x 4.7 x 5.9" (5.8 x 12 x 15 cm)
Weight	1.8 lb (0.8 kg)